West Midlands – Calibration Services, Lifting Equipment, Testing Machinery, Machine Testing, Test Machines, Load Cells, Load Monitors, Test Beds, Gripping Attachments, Universal Test Machines – West Midlands.
AJT Equipment, Brierley Hill, West Midlands
AJT Equipment Ltd, UK, was founded in 1951 and have over sixty years combined experience in the manufacture and calibration of Tensile Testing Machines and Force Testing Machines. We design both Tensile Test Machines and Force Testing Machines to our customer’s specific requirements.
We are the exclusive agent for the UK and Republic of Ireland for the sale, distribution and service of the United Calibration Corporation Universal Testing Machines, Data systems, Hardness Testers, Environmental chambers and related accessories. Therefore, together with our own large capacity Tensile Test Machines, Compression Test Machines, Force Testing Machines, Accuway loadcells, calibrations and test facilities, we are one of the most versatile Tensile Test Machines and Force Test Machines suppliers in the UK.
Our extensive range of Test Machinery has the scope to test samples as small as Single Strand Wire up to Marine Anchor Cable. We manufacture our own brand of Accuway Loadcells. Our highly trained engineers service, repair and calibrate all types of testing and weighing devices to National Standards both in-house and on-site nationally and internationally. Our in-house facilities enable us to calibrate and test equipment up to 100 Tonnes Tensile and 200 Tonnes Compression, and on-site up to 400 Tonnes Tension and 1000 Tonnes Compression.
Calibration and Repairs Service
AJT Equipment offer calibration services throughout the UK for virtually all makes and models of physical testing equipment and related accessories. We also offer an upgrade service for your existing equipment. Your testing equipment may be providing you with a decent level of service, however now might be the right time for a software or hardware upgrade to provide you with a more sophisticated system. In many cases, upgrades are an economical way to achieve up-to-date performance from your existing testing equipment.
* Superb Maintenance and Calibration Service Plans.
* Service Plans are available for all brands of testing equipment, not just AJT.
* Calibrations carried out in accordance with ISO 7500-1: 2004
* Calibrations in Tensile Testing Mode up to 4,000Kn
* Calibrations on Compression Mode up to 10,000Kn
* Service and Repair for all makes or Wire Rope Swaging Presses.
* Servicing for both Digital & Analogue Units.
* Tension or Compression Load Cells.
* Test Bed Service also available.
Accuway Load Cells
Accuway TM with handheld readouts
* Handheld Readouts.
* Made from a Lightweight Aerospace Alloy.
* Available Hermetically sealed for use in wet conditions.
* Units have a 5 metre cable close coupled to a 4 digit 15mm LCD display.
* Tare, Peak and Reset facility.
* The power source is a 9V PP3 battery, can be supplied for mains power if required (240v).
* All units are calibrated to comply with ISO 7500-1: 2004.
* The accuracy of the cells are better then 1% of applied load.
* Complete with carry case.
* 12 Month Guarantee, subject to conditions.
Accuway CM with handheld readouts
* Handheld Readouts.
* Made from a Lightweight Aerospace Alloy.
* Available Hermetically sealed for use in wet conditions.
* Tare, Peak and Reset facility.
* Units have a 5 metre cable close coupled to a 4 digit 15mm LCD display.
* All units are calibrated to comply with ISO 7500-1: 2004.
* The accuracy of the cells are better than 1% of applied load.
* The power source is a 9V PP3 battery, can be supplied for mains power if required (240v).
* 12 Month Guarantee, subject to conditions.
* Complete with carry case.
Accuway TMIR
* The cell is manufactured in aluminium alloy with HT steel bushes.
* The cell incorporates an eight gauge bridge together with associated electronics and a 9 volt PP3 non-rechargeable battery.
* Built into the load cell is a large [20mm] 3.5 digit liquid crystal display mounted on the front of the cell for easy reading from the operator’s position.
* The load cell is self contained and has no external cabling.
* A battery switch is provided on the rear of the cell to prolong battery life when the cell is out of use.
* All set up and calibration data is retained when switched off.
* The cell is automatically switched off after 15 minutes to prolong battery life.
* Battery life – typically 50 hours.
Accuway TMIR – Infrared Operation
* Control is via a hand held controller.
* Size – 95 x 60 x 40 mm.
* Battery – 1 x PP3 non-rechargeable
* Battery life – many tens/hundreds of hours depending on use.
* Mounted on the controller are four momentary action push buttons. These buttons perform the following functions - On/Off.
* Zero/Tare – button will tare up to 10% of cell capacity.
* Peak – retains the highest load applied since selecting Peak or resetting.
* Reset – resets the peak reading
* Range – The infrared controller will operate in bright ambient light conditions, however, it will not operate if the cell is directly facing into the sun.
* The minimum range is 5 metres, typically 7 metres.
Accuway SMIR - Infrared Operation
* The cell is manufactured in aluminium alloy with HT steel bushes.
* The cell incorporates an eight gauge bridge together with associated electronics and a 9 volt PP3 non-rechargeable battery.
* Built into the load cell is a large [20mm] 3.5 digit liquid crystal display mounted on the front of the cell for easy reading from the operator’s position.
* The load cell is self contained and has no external cabling.
vA battery switch is provided on the rear of the cell to prolong battery life when the cell is out of use.
* All set up and calibration data is retained when switched off.
* The cell is automatically switched off after 15 minutes to prolong battery life.
* Battery life – typically 50 hours
Accuway SMIR - Infrared Operation
* Control is via a hand held controller.
* Size – 95 x 60 x 40 mm.
* Battery – 1 x PP3 non-rechargeable
* Battery life – many tens/hundreds of hours depending on use.
* Mounted on the controller are four momentary action push buttons. These buttons perform the following functions - On/Off.
* Zero/Tare – button will tare up to 10% of cell capacity.
* Peak – retains the highest load applied since selecting Peak or resetting.
* Reset – resets the peak reading
* Range – The infrared controller will operate in bright ambient light conditions, however, it will not operate if the cell is directly facing into the sun.
* The minimum range is 5 metres, typically 7 metres.
Accuway Load Monitors
* A microprocessor and 18-bit A-D converter to provide high accuracy.
* Very low zero and gain temperature drift.
* Display up to 19999
* Proven high reliability achieved by the use of robust push buttons rather than membrane switch.
* Ratio-metric operation.
* Low level strain gauge input levels
* Peak with indefinite hold (save even with auto-power down)
* Can be adapted to other manufactures of loadcells
* Large 15mm L.C.D. display characters
* Auto power down
* Low battery indication
* 5 Volt D.C. bridge excitation
* Overload display.
Test Beds
* AJT Equipment are one of the leading manufacturers of horizontal and vertical test beds in the world.
* Each machine is made specifically to order to customers requirements.
* Safety orientated designs include manual protective, automated protective guards and minimum load on sample features.
* We have our own in-house design team with CAD facilities.
* Designed to integrate with your existing data network
* Optional PC integration and Data Acquisition are available.
* Full after sales Maintenance and Calibration services.
* We offer comprehensive training and certification covering all aspects of machine operation.
Range of Test Beds:
* 177 Horizontal Plane Tensile Testing Machine.
* 175 Vertical Tensile Testing Machine.
* 174/e Horizontal Plane Tensile Testing Machine.
* 173/e Vertical Plane Tensile Testing Machine.
* 2000-DY-T-C 10 Tonne Dynamic Testing Machine.
Gripping Attachments
Rope Grip Wedge Box
* Available for all machines up to 200 tonne capacity.
* Suitable for most materials.
* Grips smooth surfaces e.g. Wire Rope, Synthetic Nylon & Aluminium Conductor Cable.
* Grips material without damage & can be used through to destruction on rope.
* Easy to use mechanism. Self releasing when load is dispersed
* Supplied with 10 varying sizes of inserts to suit application.
Chain Grips
• Adjustable Mechanism to accommodate a range of chain sizes
Flat Belt Grips
* Split Drum Mechanism for destruction testing of synthetic flat bed materials
* Hold material up to 300mm wide
* Maximum capacity 75 tonnes
Universal Test Machines
AJT Equipment are the exclusive agent for the United Kingdom and the Republic of Ireland for the sale, distribution, and service of the United Calibration Corporation range of Universal Testing Machines, Data Systems, Hardness Testers, Environmental Chambers and related accessories.
Together with our own large capacity horizontal testing machines, compression testing machines, Accuway Load Cells, Calibration and Test facilities, we are one of the most versatile test machine suppliers in the United Kingdom.
United are committed to establishing and maintaining themselves as the front runner in materials testing technology. They pride themselves on providing test equipment built to exacting quality standards and products that are designed to meet or exceed all applicable national and international published specifications relating to the operation of materials testing equipment.
We believe that you will not find a more professional, comprehensive range of material testing products and services anywhere in today's marketplace
What we Offer:
* West Midlands Calibration Services
* West Midlands Lifting Equipment
* West Midlands Testing Machinery
* West Midlands Machine Testing
* West Midlands Test Machines
* West Midlands Load Cells
* West Midlands Load Monitors
* West Midlands Test Beds
* West Midlands Gripping Attachments
* West Midlands Universal Test Machines
Featured in West Midlands – Testing Calibration Services
Featured in West Midlands – Lifting Equipment
Featured in West Midlands – Calibration Test Services
Featured in Testing Calibration Services
Please mention FastFinders.co.uk when calling this company.
|